terry-banner.jpg

Terry

Melody 1 Platform Lift

When faced with a wheelchair access problem to a public building, ramping is often not feasible due to the length required to achieve the recommended gradient.

The Melody 1 lifting platform has been designed to overcome just this problem and is available in various models to suit lifting heights up to a maximum of 1 metre.

  • Versatile - Suited to either outdoor or indoor applications, the design incorporates an integral ramp to eliminate the need for a pit, thus keeping building work to a minimum.
  • Aesthetically Pleasing & Unobtrusive - The standard finish is maintenance free stainless steel but other materials or paint finishes are available to suit the surrounding decor.
  • State of the art hydraulic system providing smooth, quiet operation.
  • Free Standing - A major feature of the design is the lack of mast or support tower, minimising aesthetic intrusion into the environment.
  • Easy to Use - Convenient controls and shallow approach ramp
  • Reliable - Battery back-up provides normal operation (up to 30 cycles) in case of power cut.


General Specification

  • Capacity: 250Kg
  • Maximum rise: 1000mm
  • Means of operation: 24volt hydraulic scissor drive
  • Power supply: 220/240V AC~ 50/60 Hz. No dedicated supply or RCD required.
  • Safety equipment: Full platform safe edge which stops the lift should it touch an obstacle. Gate interlock. Upper level protection available
  • Internal platform dimensions: 800mm x 1400mm (standard)
  • BS 6440 & CE compliant

Download Brochure [0.2mb]


Melody 2 Vertical Access Platform Lift

When faced with a wheelchair access problem to your home, ramping is often not feasible due to the considerable length required to achieve the recommended gradient. The Melody 2 lifting platform has been designed to overcome just this problem and is available in various models to suit lifting heights up to a maximum of 2 metres (public access) and 3 metres (domestic access).

Suited to either outdoor or indoor applications, the design incorporates an integral ramp to eliminate the need for a pit, thus keeping building work to a minimum.

A major feature of the design is the lack of mast or support tower, minimising aesthetic intrusion into the environment.

The standard finish is maintenance free stainless steel but other materials or paint finishes are available to suit the surrounding decor. In the event of a mains power failure the lift features an emergency lowering facility.


General Specification

  • Capacity: 500kg
  • Power supply: 240V single phase supply ~ 50/60 Hz, 13A, with full 12V battery backup.
  • Safety equipment: Interlocked safety gates. Pressure sensitive underpan which stops the lift should it touch an obstacle.
  • Internal platform dimensions: 900mm x 1400mm version and 1100mm x 1400mm version
  • BS 6440 & CE compliance.

Download Brochure [1.1mb]

Click to Watch Demonstration Video